In tandem with an RC-06 pre-amplifier, the RB-06 provides a sound comparable in quality to that of expensive audiophile equipment – but for a fraction of the price. Conceived and engineered with the sole aim of providing high quality power in abundance, the RB-06 drives even the most demanding loudspeakers effortlessly. Team a pair of them with an RC-06 pre-amp for maximum amplification.
Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry.
A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source.
The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis.
The newest interpretation of a classic Rotel award-winning power amplifier design, the RB-1070 continues the tradition of oversized toroidal transformer and high capacity power supply. In addition, Symmetrical Signal Trace circuit topology assures the precise interchannel timing clues necessary for pinpoint stereo reproduction.
At 130 watts per channel (20 Hz to 20 kHz @ 0.03% THD into 8 ohms), the RB-1070 is more than capable of meeting the challenges of even the least efficient loudspeakers. An internal bridge option provides truly prodigious 330 watt output capability.
Front panel LED status indicators show power, protection, and bridged mode for instant system analysis. And a separate input and output for 12 volt "trigger" signals increases flexibility by allowing the amplifier to be totally integrated into even the most complex remote-controlled systems.
The RB-1080 rests close to the pinnacle of Rotel’s two channel power amplifier designs. Power output of 200 watts per channel (20 Hz to 20 kHz @ 0.03% THD into 8 ohms) is extraordinary. The Rotel-made toroidal transformer feeds separate power supplies for each channel, each with its own rectifiers, voltage regulators, and capacitor banks. Damping factor, at 1,000, shows this amplifier’s unparalleled ability to lock onto the most difficult speakers to precisely control diaphragm motion and give you the best sound quality.
The RB-1092 is the stereo version of the RB-1091 Class D amplifier. It can generate up to 2 x 500 watts into an 8 ohm load and can drive virtually any pair of loudspeakers to very loud sound pressure levels when required. Not all Class D amplifiers are alike. There are two categories: namely digitally controlled Class D and analog-controlled Class D. The former features a digitally generated control that switches a power stage. The latter amplifier design utilises an analog input signal with a switching power supply. Rotel has taken this analog-controlled Class D design a step further with the implementation of two important technologies from ICEpower®.
Rotel’s RMB-1048 is the perfect solution for a wide range of audio applications. Able to deliver in excess of 8 x 40 watts per channel into 8 ohms (65 watts into 4 ohms),
Digital amplifiers are not new. But, to date, many digital amplifiers have been relegated to low performance electronics, or limited bandwidth products such as subwoofers. Now, with ICEpower® technology, Rotel’s new RMB-1077, delivers full bandwidth, high performance sound with plenty of power output and very low heat and distortion.
The RMB-1077 offers up a lot of power in a small
package. At 7 x 100 watts per channel into 8 ohms, it is a superb choice for all but the very largest home theatre systems.
Rotel’s Class D amplifiers are technological marvels utilizing the latest circuit advances to deliver critically acclaimed performance. The RMB-1085 is a case in point. A space saving, cool-running and remarkably efficient design, the RMB-1085 is a real powerhouse, with 5 by 100 watts per channel of audiophile quality power into 8 ohms, all channels driven, at vanishingly low distortion.
The RMB-1085 is the ideal amplifier for high quality medium to large home theaters. In an elegant package less than 3” high, it will fit where large conventional amplifiers won’t, and because it produces so little heat, it won’t compromise other components located in the same space. It’s sophisticated power supply and output
stages are rock solid even with power fluctuations and complex speaker loads.
The RMB-1085 can deliver plenty of power when a
film soundtrack demands it—even those floor-shaking sonic booms so prevalent in action movies. Yet, it is also superbly adept at revealing the smallest sonic details found in background audio effects. And like every Rotel amplifier, it excels at music playback.
